Night Mode Setup and Scheduling

Night Mode reduces the AirCore P2's fan speed to its quietest setting and dims or turns off the LED ring, letting you sleep without disturbance. Air quality monitoring continues in the background, and the unit will resume your previous mode when the scheduled period ends.

What you'll need

• The Monverta app (iOS or Android) with your AirCore P2 paired
• The AirCore P2 powered on and connected to Wi-Fi

Steps

1. Open the Monverta app and wait for the home screen to load. Your paired devices will appear as cards.
2. Tap your AirCore P2 card to open the device control screen.
3. Tap Mode in the control panel at the bottom of the screen. You will see Auto, Boost, Night, and Manual options.
4. Select Night Mode. The fan will immediately drop to its lowest speed setting.
5. Set a schedule. Tap the clock icon next to Night Mode to open the scheduler. Set your preferred start time (e.g., 22:00) and end time (e.g., 07:00). The schedule repeats daily until you change it.
6. Adjust LED brightness. While in Night Mode settings, use the brightness slider to dim the LED ring or turn it off entirely. A fully dark room helps maintain your sleep cycle.

Tips

• In Night Mode the AirCore P2 operates at just 24 dB — quieter than a whisper — so it will not disturb light sleepers.
• Air quality monitoring continues even when the LED ring is off. If air quality drops significantly, the unit will not increase fan speed in Night Mode — it prioritises silence. Switch to Auto mode if you want reactive fan control overnight.
• You can also activate Night Mode manually using the touch button on top of the unit: press and hold for 2 seconds until the LED ring pulses once and dims.
• Night Mode settings sync across all devices signed into your Monverta account.