Self-Clean Cycle Guide

Running a self-clean cycle after every use keeps your AquaDry S1 hygienic and prevents odour build-up. The process takes about 60 seconds and requires no disassembly.

Steps

1. Return the unit to the charging dock and ensure it is seated fully upright. You should hear a click as it connects.
2. Check that the clean water tank has enough water — at least to the minimum fill line. The self-clean cycle uses a small amount of clean water to flush the roller and internal channels.
3. Press and hold the Self-Clean button on the dock base for 2 seconds. The indicator light will pulse blue to confirm the cycle has started.
4. Wait approximately 60 seconds. The unit will spin the roller at high speed while flushing water through. Do not remove the unit during this process.
5. When the light turns solid green, the cycle is complete. Remove the dirty water tank, empty it into a sink, and rinse under running water before replacing.