How to Connect Therma One T1 to Wi-Fi

Connecting your Therma One T1 to Wi-Fi enables remote control through the Monverta app, automatic firmware updates, and cloud-based scheduling. The T1 supports 2.4 GHz Wi-Fi networks only.

What you'll need

• Your Wi-Fi network name (SSID) and password
• A smartphone or tablet with the Monverta Home app installed (iOS 15+ or Android 10+)
• The T1 powered on and displaying the home screen
• Your router within 10 metres of the thermostat for initial setup

Steps

1. Download the Monverta Home app from the App Store or Google Play. Create an account or sign in if you already have one. The app requires location permissions to detect nearby devices.
2. Power on the T1. If this is the first time powering on, the setup wizard will launch automatically. If the T1 has already been set up, navigate to Settings > Wi-Fi on the thermostat display.
3. Open Wi-Fi settings on the thermostat. On the T1 display, go to Settings > Wi-Fi > Connect to Network. The T1 will scan for available 2.4 GHz networks. This takes approximately 10 seconds.
4. Select your network. Scroll through the list of detected networks and tap your home Wi-Fi SSID. If your network is hidden, select Other Network at the bottom of the list and type the SSID manually.
5. Enter your Wi-Fi password. Use the on-screen keyboard to type your password. Tap the eye icon to reveal characters as you type. Press Connect when ready.
6. Confirm the connection. The T1 will display a Wi-Fi icon in the top-right corner of the home screen once connected. In the Monverta Home app, go to Home > Add Device and follow the prompts to pair the T1 with your account.

Tips

• 2.4 GHz only — The T1 does not support 5 GHz networks. If your router uses a combined band, split the bands in your router admin panel (typically at 192.168.1.1) and connect to the 2.4 GHz SSID.
• Position matters — For a reliable connection, keep the T1 within 10 metres of your router with no more than two walls between them. Thick stone or concrete walls reduce signal significantly.
• MAC filtering — If your router uses MAC address filtering, you will need to add the T1's MAC address. Find it at Settings > About > Network Info on the thermostat.
• Enterprise networks — WPA2-Enterprise (802.1X) networks are not supported. The T1 works with WPA2-Personal and WPA3-Personal.