Quick Start — JetWash Pro 360

What's in the box

1. JetWash Pro 360 main unit
2. High-pressure lance
3. Trigger gun
4. 8 m high-pressure hose
5. Rotary nozzle (fitted)
6. 40° fan nozzle
7. Detergent nozzle
8. Garden hose adapter (G3/4")
9. Lance storage clip

Step 1: Choose your location

Place the unit on a flat, stable surface. Keep it within 2 m of a power outlet rated at 13 A or higher. The machine is splash-resistant but not waterproof — do not submerge or leave outdoors uncovered.

Step 2: Connect the water supply

Attach your garden hose to the inlet port on the rear of the unit using the supplied G3/4" adapter. Turn on the water supply fully before switching on the machine. Running the pump dry will damage it.

Step 3: Assemble the lance and gun

Insert the high-pressure lance into the trigger gun and twist clockwise until it locks. Select your nozzle — the rotary nozzle is fitted by default. Push any replacement nozzle in and rotate a quarter-turn to lock.

Step 4: Connect the high-pressure hose

Push the quick-connect fitting on the hose into the outlet on the unit until it clicks. Connect the other end to the trigger gun the same way. Confirm both ends are seated before switching on.

Step 5: First use

Switch the unit on using the rocker switch. Squeeze the trigger briefly to purge air from the system — you will hear a brief surge before pressure stabilises. Begin washing at a distance of at least 30 cm from the surface.

Step 6: Adjust pressure and detergent

Use the variable pressure dial on the unit body to reduce flow for delicate surfaces. To apply detergent, switch to the detergent nozzle (black tip) and fill the onboard 0.5 L reservoir.

Step 7: Shutdown and storage

Release the trigger and switch off the unit. Turn off the water supply. Squeeze the trigger again to release residual pressure. Disconnect the hose. Wrap the high-pressure hose loosely and clip the lance to the side storage clip.

Tips

• Never aim the jet at people, animals, or electrical fittings.
• Flush the detergent system with clean water after each use to prevent blockage.
• Store the unit in a frost-free location. Residual water in the pump can freeze and crack the housing.