Cleaning Solution Compatibility
Using the wrong cleaning solution in your AquaDry S1 can cause excessive foaming, damage internal seals, or leave residue that degrades the roller brush. This reference guide covers what is safe to use and what to avoid.
Compatibility Table
| Solution | Status | Notes |
|---|---|---|
| Monverta Floor Solution (MV-ADS1-CLEAN1L) | Compatible | Recommended. Low-foam formula designed for the AquaDry S1 pump system. |
| Water only | Compatible | Safe for daily use. Effective for light dust and maintenance cleans. |
| White vinegar (diluted 1:10 with water) | Compatible | Suitable for occasional deep cleaning. Do not exceed 1:10 ratio. |
| Bleach or chlorine-based cleaners | NOT Compatible | Damages rubber seals and degrades the roller fabric. Voids warranty if damage results. |
| Floor polish or wax solutions | NOT Compatible | Leaves sticky residue in internal channels and clogs the pump. |
| Essential oils | NOT Compatible | Oils degrade rubber seals over time and can cause foaming in the dirty water tank. |
| Steam cleaner additives | NOT Compatible | Formulated for high-temperature systems. Causes excessive foam and pump strain at room temperature. |
Why It Matters
The AquaDry S1 uses a low-pressure pump to deliver clean water to the roller. Solutions that foam excessively overwhelm the dirty water tank and can trigger the overflow sensor, shutting the machine down mid-clean. Harsh chemicals attack the internal rubber seals, leading to leaks that are not covered under warranty.
Recommended
For the best results, use Monverta Floor Solution (MV-ADS1-CLEAN1L). It is specifically formulated for the S1's pump and roller system — low foam, fast drying, and leaves no residue.